A lot of unexpected situations and accidents often occur in your life and you often need to go to a hospital for emergency treatment. During this process, stretchers are often used to carry the wounded. In clinical practice, it is often necessary to use stretchers to transport patients. We have long used canvas stretchers or wheeled scaffolding stretchers. The common feature is that patients must be lifted or lifted before moving them easily The patient feels discomfort and there is no safety precaution in such stretcher. There is a potential safety hazard such as a fall when transporting an agitated, unconscious, frail patient. Escort must be strengthened by more than one person, increasing the number and psychology of the delivery staff pressure. Easy safety stretcher production, material: divided into two parts stretcher plate and stretcher, stretcher plate for wood, alloy, plastic and other materials, stretcher sets of high quality, strong, strong tensile strength fabrics (such as cotton canvas , Sand release, etc.). Production methods: Stretcher plate rectangular plate, the thickness of the board can be determined according to the degree of toughness, cut sharp edges around. Stretcher set for the rectangular canvas cover, its size and stretcher size to adapt, divided into two layers, left and right sides, front and rear ends. In the bottom of the lower layer of each horizontal sewing two parallel to each other with a fixed strap (sewing position in order to facilitate the body's upper limb and abdomen and lower extremity knee is appropriate), the ends of the fixed belt with male and female nylon paste Or other buckle device. A pair of grippers are sewn at the front and back ends of the lower part of the stretcher sleeve. A double-ended, open-ended zipper is sewn to one side of the stretcher wrap and to the other. How to use it, move the patient from the bed to the stretcher, and first explain the purpose and meaning of the use to the patient and her entourage to obtain their cooperation. Put the stretcher plate into the stretcher sleeve to lock the zipper. One person assists the patient to try his best to lie down on the same side, and the other person places the safety stretcher under the patient from the opposite side. The two assist the patient to lay on the safety stretcher, bundle the two fixing belts on the bottom of the stretcher cover onto the patient, The safety stretcher together with the patient shall be lifted onto the stretcher trolley by two or more persons passing through the fixing belt at the bottom of the lower stretcher or both ends of the stretcher cover. To ensure the stability of the stretcher and the patient on the stretcher trolley, To ensure safety, two straps on the underside of the stretcher cover can be attached to the underside of the cart. Arrived at the appropriate place, the safety stretcher can be carried directly to the examination bed. Move the patient from the stretcher trolley to the bed: first raise the safety stretcher and patient to the bed with the bottom straps or both ends of the stretcher sleeve, and then lift the patient onto the bed by two or more persons through the top of the stretcher sleeve The strap lifts the patient and the other person stretches the stretcher. Remove the stretcher cover by helping the patient turn over. For patients who do not need to sleep hard board bed, the stretcher sleeve may also not be placed on the shelf, roll over the stretcher set directly to the patient under the body, the use of fixed belt or grab lift the patient manual operation or carried to the stretcher trolley On the run.
Previous page: Old houses transform the work needed for a stretcher
Next page: How to improve and enhance the comfort of the stretcher