1 restructuring process

Performed with the original configuration of the foldable stretcher restructuring, remove the wooden handle both ends of the steel pipe, steel pipe of the same diameter and take two 5cm elbow, welded steel pipe at one end, elbow pointing to the front of the canvas, and then take the same two long 15cm diameter welded steel pipe at the other end (conditional one can directly produce finished products), remove the original two foldable stretcher beams, adjusting the canvas to the middle position of the steel pipe. Never bend at one end of each 50 cm, 95 cm, 140 cm and 185 cm drilled at the original fixed beam direction and the same orifice diameter. The corresponding position in the canvas also cut holes, two beams will be removed along with the bottom bracket together again fixed on both ends of the hole, and then take the same two beams to remove the bottom bracket riveted on the two holes in the middle, four a folding direction of the beam bend one end point, and finally put on both ends of a steel pipe slip rubber sleeve, a collapsible, boarding a rescue stretcher on restructuring became the stretcher length 220 cm, width 54 expanded cm, folded width 10 cm, total weight 10 kg.

2 Use

Participate in flight health security, boarding the rescue ambulance stretcher placed under a seat back. Implementing lifesaving, rescue stretcher medic holding fast to reach the left side of the aircraft. Expand the stretcher is rested body is formed boarding ladder, boarded the plane to open the canopy, the pilot in distress rescued by nurses and ambulance drivers took until after the medic down the stretcher fell to the ground. The pilot then placed on a stretcher and carried to an ambulance, quickly out of the danger zone, the necessary disposal.

3 Discussion

With the continuous development of high-tech military, air force aircraft gradually upgrading, and now the troops of the new aircraft generally have a machine body, on both sides of the cockpit without boarding riding characteristics thereof, thus unarmed boarding very difficult. But so far, on the flight to participate in logistical support and health units still no new aircraft machine supporting life-saving facilities, thus giving flight health security has brought great difficulties, according to the original machine life-saving procedure is difficult to implement for new aircraft boarding lifesaving response to this situation, the author through repeated practice, the restructuring of the rescue stretcher on this machine, so as to solve this problem. Boarding boarding ladder and rescue stretcher stretcher into one, saving both boarding, but also carry the wounded, for a variety of models to use, rapid implementation boarding rescue, saving time, no ground can provide special boarding ladder separate boarding lifesaving, greatly improving the ability to protect the health of flight. According to our experiments, this stretcher can withstand the weight of 180 kg. Beam can withstand the weight of 100 kg. Place folded. Easy to carry. Air force flight is health security in a very useful tool, it should be introduced.